Skip to product information
1 of 6


MXR Bass D.I.+ Distortion Pedal with Direct In and XLR Out

Regular price $ 189.99 USD
Regular price Sale price $ 189.99 USD
Sale Sold out
Shipping calculated at checkout.

For your consideration, Garrett Park Guitars presents this MXR Bass D.I.+ Pedal with Direct In and XLR Out.

Finally, all the essentials in one tough little box. You need a serious D.I. for playing live and laying down killer tracks. You've got to have a preamp and finely tuned EQ to add punch to your tones. And you definitely can't do without some rich, custom distortion. This one-of-a-kind pedal gives you the whole deal in a bomb-proof enclosure that will survive even the most out-of-control gigs and players. Built with the highest quality components, the M-80 can give you everything from warmth and transparency to a volcanic roar, without making you scroll through menu screens or an indecipherable manual. Engage the color switch for some sweet preset EQ, then tweak your tone with three band control. Dial-in your ideal distortion with the gain knob and blend just the right amount into your clean signal, then kick it on and off at will. The adjustable noise gate pours on the sustain and cuts out hum and hiss. With XLR and parallel 1/4" outputs and a phantom power switch, you'll never have a problem delivering your choice of new tones.


  • Phantom/Ground: enables Phantom Power or Ground Lift
  • Left Footswitch: toggles Effects on/bypass (red LED=on)
  • Right Footswitch toggles Distortion channel in/out (red LED at top of unit indicates Distortion channel active)
  • Bass-Mid-Treble EQ Knobs: are active when effect is on
  • Color Switch: activates a preset EQ optimized for bass (switch depressed down)
  • Clean Volume and Color: controls are active only in Clean Channel mode (Effect Footswitch on and Distortion off)
  • Distortion Channel Mode: (Effect and Distortion Footswitches on) provides controls for Gain to set distortion level, Blend to mix distorted/ clean signal, and Volume
  • Gate Switch and Trigger Knob: work interactively to provide an adjustable noise gate. With Gate active (switch depressed down), the Trigger Knob sets the noise floor threshold, or sensitivity, to cut hum and hiss from the distortion signal


  • Input Impedance: 2.2 MΩ
  • Output Impedance:
    • Unbalanced 150 Ω
    • Balanced 300 Ω
  • Bypass Freq. Response: +0/-0.5 dB, 20 Hz to 20 kHz
  • Tone Controls:
    • Bass ±18 dB, 60 Hz
    • Mid ±10 dB, 850 Hz
    • Treble ±12 dB, 4 kHz
  • Noise Floor*:
    • Bypass: -102 dBV
    • Clean Effect: -98 dBV
    • Distortion Effect, Gate Off: -94 dBV
    • Distortion Effect, Gate On: -98 dBV
  • Volume Control Range: 40 dB
  • Gate Trigger Range: 28 dB
  • Sensitivity: -66 dBV at 1 kHz
  • Bypass: Buffered
  • Current Draw: 9 mA
  • Power Supply: 9 volts DC

Please call, chat, or email for more information.